Fireproof and Waterproof Liquids
PROTEC NON COMBUSTABILITY SOLUTION
PROTEC when putting to surface that gives the flammability properties and It's organic which does not damage to the ecological system, intended for use by mixing with water.
PROTEC a high cooling effect on fire that cause prevent smoke The place does not put out the flames again
when applied to early flammable products such as cotton. wood, paper etc. gives excellent flammability properties. The active substance in PROTECS prevents to reach fire heat degrees. When applied to plant leaf that protects from high temperature during the fire. Leaf surface cleanable by raining and There are no harming. PROTEC 100% soluble in Nature
PROTEC can be used as a disinfectant, do not harmful to human health.
Specification
Color: Purple
Storage: 5 years
PH: 6 - 6,5
Content: Water, Silicon, Aluminum, Calcium
Package: 30 - 60 - 220 kg
USAGE
Spray and dipping method.
PRODER: Polymer-based, Water-based, It is a product.
Surfaces to be applied.
It is applied to plaster, concrete, aerated concrete, foam concrete, pearlite plaster and all kinds of concrete surfaces in order to provide water insulation, to maintain breathing ability and to prevent contamination and salt vomiting.
Features
It provides high water repellency thanks to its impregnation feature on surfaces. At the same time does not spoil the natural appearance. It prevents the growth of organisms such as moss and fungi on the surfaces it is applied. Prevents calcification by resistance to dissolved salts.
Technical specifications
Color: white.
Use: Sliding, Spraying
Density: 1 g / cm3
pH: 7.5 - 8
Solids: 1%
Drying Time: 4 hours after
Flash Point: none
Storage Life: 1 year
Packing Type: 5 - 10 - 30 lt. in plastic drums.
Protective Life: 5 years
Depending on the smoothness and absorbency of the surface, 5 m² can be applied in a single coat with 1kg. Controlled sample work should be performed for precise consumption.
Application:
The application surfaces should be dry, free from dust, dirt, and oil, and thoroughly cleaned from swelling and self-supporting parts.
PRODER can be applied to the surface by brush or spraying. It is recommended to apply two or three coats on very absorbent surfaces. No film is formed after the application.
Scope of application:
Concrete floor surfaces on roofs and terraces
Terrace, Balcony, Bathroom Tiles, and ceramic grouts.
Facade, plaster surfaces.
Perlite and Perlite Plaster Surfaces
Prefabricated, Precast Surfaces.
Basement and ceiling paint blisters Prevent.
Preserving historic stone structures.
Historical Artifacts to be Preserved in Natural Conditions.
Porous Provide water impermeability in lightweight concrete.
